The base flange of my horn has a 2" FIP threads. Based on my research, this flange matches the bolt patten of the horn. My guess is the original base with the debris screen is long gone. So I guess just put a 2" to 1" bushing in the base and goto town. I suppose I could cut out a piece of wire mesh and mill a slot for a make shift debris screen.
Is this really needed?
Thanks,
Ben
Replacement base for type b
Moderator:David
-
benscale160
- Forum Newbie
- Posts:4
- Joined:Fri Oct 26, 2018 4:18 am
- Do you own a Diaphone?:Yes
-
Jim
- Diaphone Owner
- Posts:1131
- Joined:Tue Jan 28, 2003 2:41 pm
- Do you own a Diaphone?:Yes
- Location:Potter Valley, CA
Re: Replacement base for type b
Considering that the piston might be damaged by debris and that replacements are so hard to come by, any steps taken to protect it are just smart.